top of page
ALL Finance terms are subject to approval. Part exchange options is also available. Contact us on 99830334 (Telephone and Whatsapp) or email us at muturimalta@gmail.com for more information
RUSH
rush 1000
Type
Type Four cylinders, 4 stroke, 16 valves, with countershaft
Timing system
“D.O.H.C”, radial valve and DLC tappet
Total displacement
998 cm3 (60.9 cu. in.)
Compression ratio
13.4:1
Starting
Electric
Bore x stroke
79 mm x 50.9 mm (3.1 in. x 2.0 in.)
Max. power - rpm (at the crankshaft)
153,0 kW (208 hp) at 13.000 rpm
Max. power - rpm (at the crankshaft) **
156,0 kW (212 hp) at 13.600 rpm**
Max. torque - rpm
116,5 Nm (11,9 kgm) at 11.000 rpm
Cooling system
Cooling with separated liquid and oil radiators
Engine management system
Integrated ignition - injection system MVICS 2.1 (Motor & Vehicle Integrated Control System) with eight injectors (4 lower fuel injectors by Mikuni + 4 upper fuel injectors by Magneti Marelli with increased fuel flow). Engine control unit Eldor Nemo 2.1, throttle body bore 50 mm diameters full ride by wire Mikuni, pencil-coil with ion-sensing technology, control of detonation and misfire - Torque control with four maps - Traction control with 8 levels + off and wheelie control with inertial platform
Electronic quick-shift
MV EAS 3.0 (Electronically Assisted Shift Up & Down)
Clutch
Wet, multi-disc with back torque limiting device and Brembo radial master cylinder/lever assembly
Transmission
Cassette style; six speed, constant mesh
Primary drive
48/82
First gear
14/37
Second gear
16/33
Third gear
18/31
Fourth gear
20/30
Fifth gear
22/29
Sixth gear
21/25
Final drive ratio
15/41
Maximum speed*
over 300 km/h (186 mph)
Acceleration
0-100 km/h in 3.15 s; 0-200 km/h in 8.30 s.
Voltage
12 V
Alternator
350 W at 5.000 rpm
Battery
Li-ion 12 V - 4.0 Ah
Frame type
CrMo Steel tubular trellis
Rear swing arm pivot plates material
Aluminium alloy - Adjustable swingarm pivot height
Front suspension type
Öhlins Nix EC hydraulic “upside down” front fork with TIN superficial treatment.Completely adjustable with electronically controlled compression and rebound damping with manually controlled spring preload.
Fork dia.
43 mm (1.69 in.)
Wheel travel
120 mm (4.72 in.)
Rear suspension type
Progressive, Öhlins EC TTX single shock absorber completely adjustable with electronically controlled compression and rebound damping and spring preload
Single sided swing arm material
Aluminium alloy
Wheel travel
120 mm (4.72 in.)
Front brake
Double floating disc with Ø 320 mm (Ø 12.6 in.) diameter, with steel braking disc and aluminium flange - Brembo radial master cylinder/level assembly
Front brake caliper
Brembo Stylema radial-type, single-piece with 4 pistons Ø 30 mm (Ø 1.18 in.)
Rear brake
Single steel disc with Ø 220 mm (Ø 8.66 in.) dia. Brembo PS13 brake master cylinder
Rear brake caliper
Brembo with 2 pistons Ø 34 mm (Ø 1.34 in.)
ABS System
Continental MK100 with RLM (Rear Wheel Lift-up Mitigation) and with cornering function
Front wheel: Material/size
Aluminium alloy spoked wheel 3,50 ” x 17 ”
Rear wheel: Material/size
Forged alluminium alloy 6,00 ” x 17 ” with carbon fiber cover
Front tyre
120/70 - ZR 17 M/C (58 W)
Rear tyre
200/55 - ZR 17 M/C (78 W)
Fairing material
Carbon fiber and thermoplastic material
Steering damper
Öhlins EC with electronic manual and automatic adjustment modes
Wheelbase
1.415 mm (55.71 in.)
Overall length
2.080 mm (81.89 in.)
Overall width
805 mm (31.69 in.)
Saddle height
845 mm (33.27 in.)
Min. ground clearance
141 mm (5.55 in.)
Trail
97 mm (3.82 in.)
Dry weight
186 kg (410.06 lbs.) - 184 kg (405.65 lbs.)**
Fuel tank capacity
16 l (4.23 U.S. gal.)
Environmental Standard
Euro 5
Combined fuel consumption
6.8 l/100 km
CO2 Emissions
158 g/km
Type Four cylinders, 4 stroke, 16 valves, with countershaft
Timing system
“D.O.H.C”, radial valve and DLC tappet
Total displacement
998 cm3 (60.9 cu. in.)
Compression ratio
13.4:1
Starting
Electric
Bore x stroke
79 mm x 50.9 mm (3.1 in. x 2.0 in.)
Max. power - rpm (at the crankshaft)
153,0 kW (208 hp) at 13.000 rpm
Max. power - rpm (at the crankshaft) **
156,0 kW (212 hp) at 13.600 rpm**
Max. torque - rpm
116,5 Nm (11,9 kgm) at 11.000 rpm
Cooling system
Cooling with separated liquid and oil radiators
Engine management system
Integrated ignition - injection system MVICS 2.1 (Motor & Vehicle Integrated Control System) with eight injectors (4 lower fuel injectors by Mikuni + 4 upper fuel injectors by Magneti Marelli with increased fuel flow). Engine control unit Eldor Nemo 2.1, throttle body bore 50 mm diameters full ride by wire Mikuni, pencil-coil with ion-sensing technology, control of detonation and misfire - Torque control with four maps - Traction control with 8 levels + off and wheelie control with inertial platform
Electronic quick-shift
MV EAS 3.0 (Electronically Assisted Shift Up & Down)
Clutch
Wet, multi-disc with back torque limiting device and Brembo radial master cylinder/lever assembly
Transmission
Cassette style; six speed, constant mesh
Primary drive
48/82
First gear
14/37
Second gear
16/33
Third gear
18/31
Fourth gear
20/30
Fifth gear
22/29
Sixth gear
21/25
Final drive ratio
15/41
Maximum speed*
over 300 km/h (186 mph)
Acceleration
0-100 km/h in 3.15 s; 0-200 km/h in 8.30 s.
Voltage
12 V
Alternator
350 W at 5.000 rpm
Battery
Li-ion 12 V - 4.0 Ah
Frame type
CrMo Steel tubular trellis
Rear swing arm pivot plates material
Aluminium alloy - Adjustable swingarm pivot height
Front suspension type
Öhlins Nix EC hydraulic “upside down” front fork with TIN superficial treatment.Completely adjustable with electronically controlled compression and rebound damping with manually controlled spring preload.
Fork dia.
43 mm (1.69 in.)
Wheel travel
120 mm (4.72 in.)
Rear suspension type
Progressive, Öhlins EC TTX single shock absorber completely adjustable with electronically controlled compression and rebound damping and spring preload
Single sided swing arm material
Aluminium alloy
Wheel travel
120 mm (4.72 in.)
Front brake
Double floating disc with Ø 320 mm (Ø 12.6 in.) diameter, with steel braking disc and aluminium flange - Brembo radial master cylinder/level assembly
Front brake caliper
Brembo Stylema radial-type, single-piece with 4 pistons Ø 30 mm (Ø 1.18 in.)
Rear brake
Single steel disc with Ø 220 mm (Ø 8.66 in.) dia. Brembo PS13 brake master cylinder
Rear brake caliper
Brembo with 2 pistons Ø 34 mm (Ø 1.34 in.)
ABS System
Continental MK100 with RLM (Rear Wheel Lift-up Mitigation) and with cornering function
Front wheel: Material/size
Aluminium alloy spoked wheel 3,50 ” x 17 ”
Rear wheel: Material/size
Forged alluminium alloy 6,00 ” x 17 ” with carbon fiber cover
Front tyre
120/70 - ZR 17 M/C (58 W)
Rear tyre
200/55 - ZR 17 M/C (78 W)
Fairing material
Carbon fiber and thermoplastic material
Steering damper
Öhlins EC with electronic manual and automatic adjustment modes
Wheelbase
1.415 mm (55.71 in.)
Overall length
2.080 mm (81.89 in.)
Overall width
805 mm (31.69 in.)
Saddle height
845 mm (33.27 in.)
Min. ground clearance
141 mm (5.55 in.)
Trail
97 mm (3.82 in.)
Dry weight
186 kg (410.06 lbs.) - 184 kg (405.65 lbs.)**
Fuel tank capacity
16 l (4.23 U.S. gal.)
Environmental Standard
Euro 5
Combined fuel consumption
6.8 l/100 km
CO2 Emissions
158 g/km
BRUTALE
BRUTALE R
iming system
“D.O.H.C” with mechanical chain tensioner and DLC tappet
Total displacement
798 cm3 (48.7 cu. in.)
Compression ratio
12.3:1
Starting
Electric
Bore x stroke
79 mm x 54.3 mm (3.1 in. x 2.1 in.)
Max. power - rpm (at the crankshaft)
82 kW (112 hp) at 11.000 rpm
Max. torque - rpm
85 Nm (8.67 kgm) at 8.500 rpm
Cooling system
Cooling with separated liquid and oil radiators
Engine management system
Integrated ignition - injection system MVICS 2.1 (Motor & Vehicle Integrated Control System) with six injectors. Engine control unit Eldor Nemo 2.1, throttle body bore 47 mm diameters full ride by wire Mikuni, pencil-coil with ion-sensing technology, control of detonation and misfire. Torque control with four maps. Traction control with eight levels of intervention.
Electronic quick-shift
MV EAS 3.0 (Electronically Assisted Shift Up & Down)
Clutch
Multi-disk wet clutch with hydraulic actuation and back torque limiting device
Transmission
Cassette style; six speed, constant mesh
Primary drive
22/41
First gear
13/37
Second gear
16/35
Third gear
18/32
Fourth gear
20/30
Fifth gear
22/29
Sixth gear
21/25
Final drive ratio
16/41
Maximum speed*
237.0 km/h (147.2 mph)
Acceleration
0-100 km/h in 3.75 s; 0-200 km/h in 12.30 s.
Voltage
12 V
Alternator
350 W at 5.000 rpm
Battery
12 V - 8.5 Ah
Frame type
ALS Steel tubular trellis
Rear swing arm pivot plates material
Aluminium alloy
Front suspension type
Marzocchi “UPSIDE DOWN” telescopic hydraulic fork with DLC treatment, anodized fork legs and rebound-compression damping and spring preload external and separate adjustment
Fork dia.
43 mm (1.69 in.)
Wheel travel
125 mm (4.92 in.)
Rear suspension type
Progressive, Sachs single shock absorber with rebound and compression damping and spring preload adjustment
Single sided swing arm material
Aluminium alloy
Wheel travel
130 mm (5.12 in.)
Front brake
Double floating disc with Ø 320 mm (Ø 12.6 in.) diameter, with steel braking disc and flange
Front brake caliper
Brembo radial-type monobloc, with 4 pistons Ø 32 mm (Ø 1.26 in.)
Rear brake
Single steel disc with Ø 220 mm (Ø 8.66 in.) dia.
Rear brake caliper
Brembo with 2 pistons - Ø 34 mm (Ø 1.34 in.)
ABS System
Continental MK100 with RLM (Rear Wheel Lift-up Mitigation) and with cornering function
Front wheel: Material/size
Aluminium alloy 3.50” x 17”
Rear wheel: Material/size
Aluminium alloy 5.50” x 17”
Front tyre
120/70 - ZR 17 M/C (58 W)
Rear tyre
180/55 - ZR 17 M/C (73 W)
Fairing material
Thermoplastic
Wheelbase
1.400 mm (55.12 in.)
Overall length
2.045 mm (80.51 in.)
Overall width
875 mm (34.45 in.)
Saddle height
830 mm (32.68 in.)
Min. ground clearance
135 mm (5.31 in.)
Trail
103.5 mm (4.07 in.)
Dry weight
175 kg (385.8 lbs.)
Fuel tank capacity
16,5 l (4.36 U.S. gal.)
Environmental Standard
Euro 5
Combined fuel consumption
5.1 l/100 km
CO2 Emissions
117 g/km
BRUTALE RR
Timing system
“D.O.H.C” with mechanical chain tensioner and DLC tappet
Total displacement
798 cm3 (48.7 cu. in.)
Compression ratio
13.3:1
Starting
Electric
Bore x stroke
79 mm x 54.3 mm (3.1 in. x 2.1 in.)
Max. power - rpm (at the crankshaft)
103 kW (140 hp) at 12.300 rpm
Max. torque - rpm
87 Nm (8.87 kgm) at 10.250 rpm
Cooling system
Cooling with separated liquid and oil radiators.
Engine management system
Cooling with separated liquid and oil radiators. Integrated ignition - injection system MVICS 2.1 (Motor & Vehicle Integrated Control System) with six injectors. Engine control unit Eldor Nemo 2.1, throttle body bore 50 mm diameters full ride by wire Mikuni, pencil-coil with ion-sensing technology, control of detonation and misfire. Torque control with four maps. Traction control with eight levels of intervention.
Electronic quick-shift
MV EAS 3.0 (Electronically Assisted Shift Up & Down)
Clutch
Multi-disk wet clutch with hydraulic actuation and back torque limiting device
Transmission
Cassette style; six speed, constant mesh
Primary drive
22/41
First gear
13/37
Second gear
16/34
Third gear
18/32
Fourth gear
19/30
Fifth gear
21/30
Sixth gear
22/29
Final drive ratio
16/41
Maximum speed*
244.0 km/h (151.6 mph)
Acceleration
0-100 km/h in 3.45 s; 0-200 km/h in 9.90 s.
Voltage
12 V
Alternator
350 W at 5.000 rpm
Battery
12 V - 8.5 Ah
Frame type
ALS Steel tubular trellis
Rear swing arm pivot plates material
Aluminium alloy
Front suspension type
Marzocchi “UPSIDE DOWN” aluminium telescopic hydraulic fork with DLC treatment, anodized fork legs and having rebound- compression damping and spring preload external and separate adjustment
Fork dia.
43 mm (1.69 in.)
Wheel travel
125 mm (4.92 in.)
Rear suspension type
Progressive, Sachs single shock absorber with rebound and compression damping and spring preload adjustment
Single sided swing arm material
Aluminium alloy
Wheel travel
130 mm (5.12 in.)
Front brake
Double floating disc with Ø 320 mm (Ø 12.6 in.) diameter, with steel braking disc and flange
Front brake caliper
Brembo radial-type, with 4 pistons Ø 32 mm (Ø 1.26 in.)
Rear brake
Single steel disc with Ø 220 mm (Ø 8.66 in.) dia.
Rear brake caliper
Brembo with 2 pistons - Ø 34 mm (Ø 1.34 in.)
ABS System
Continental MK100 with RLM (Rear Wheel Lift-up Mitigation) and with cornering function
Front wheel: Material/size
Aluminium alloy 3.50” x 17”
Rear wheel: Material/size
Aluminium alloy 5.50” x 17”
Front tyre
120/70 - ZR 17 M/C (58 W)
Rear tyre
180/55 - ZR 17 M/C (73 W)
Fairing material
Thermoplastic
Wheelbase
1.400 mm (55.12 in.)
Overall length
2.045 mm (80.51 in.)
Overall width
875 mm (34.45 in.)
Saddle height
830 mm (32.68 in.)
Min. ground clearance
135 mm (5.31 in.)
Trail
103.5 mm (4.07 in.)
Dry weight
175 kg (385.80 lbs.)
Fuel tank capacity
16,5 l (4.36 U.S. gal.)
Environmental Standard
Euro 5
Combined fuel consumption
5.9 l/100 km
CO2 Emissions
138 g/km
BRUTALE 1000 RS
Compression ratio
13.4:1
Starting
Electric
Bore x stroke
79 mm x 50.9 mm (3.1 in. x 2.0 in.)
Max. power - rpm (at the crankshaft)
153,0 kW (208 hp) at 13.000 rpm
Max. torque - rpm
116,5 Nm (11,9 kgm) at 11.000 rpm
Cooling system
Cooling with separated liquid and oil radiators
Engine management system
Integrated ignition - injection system MVICS 2.1 (Motor & Vehicle Integrated Control System) with eight injectors (4 lower fuel injectors by Mikuni + 4 upper fuel injectors by Magneti Marelli with increased fuel flow). Engine control unit Eldor Nemo 2.1, throttle body bore 50 mm diameters full ride by wire Mikuni, pencil-coil with ion-sensing technology, control of detonation and misfire Torque control with four maps. Traction control with 8 levels + off and wheelie control with inertial platform
Electronic quick-shift
MV EAS 3.0 (Electronically Assisted Shift Up & Down)
Clutch
Wet, multi-disc with back torque limiting device and Brembo radial master cylinder/lever assembly
Transmission
Cassette style; six speed, constant mesh
Primary drive
48/82
First gear
14/37
Second gear
16/33
Third gear
18/31
Fourth gear
20/30
Fifth gear
22/29
Sixth gear
21/25
Final drive ratio
15/41
Maximum speed*
over 300 km/h (186 mph)
Acceleration
0-100 km/h in 3.15 s; 0-200 km/h in 8.30 s.
Voltage
12 V
Alternator
350 W at 5.000 rpm
Battery
Li-ion 12 V - 4.0 Ah
Frame type
CrMo Steel tubular trellis
Rear swing arm pivot plates material
Aluminium alloy - Adjustable swingarm pivot height
Front suspension type
Marzocchi “UPSIDE - DOWN” telescopic hydraulic fork with DLC treatment and adjustable rebound- compression damping and external spring preload.
Fork dia.
50 mm (1.97 in.)
Wheel travel
120 mm (4.72 in.)
Rear suspension type
Progressive, Sachs single shock absorber with rebound and compression (High speed/Low speed) damping and spring preload adjustment
Single sided swing arm material
Aluminium alloy
Wheel travel
120 mm (4.72 in.)
Front brake
Double floating disc with Ø 320 mm (Ø 12.6 in.) diameter, with steel braking disc and aluminium flange - Brembo radial master cylinder/level assembly
Front brake caliper
Brembo Stylema radial-type, single-piece with 4 pistons Ø 30 mm (Ø 1.18 in.)
Rear brake
Single steel disc with Ø 220 mm (Ø 8.66 in.) dia.- Brembo PS13 brake master cylinder
Rear brake caliper
Brembo with 2 pistons Ø 34 mm (Ø 1.34 in.)
ABS System
Continental MK100 with RLM (Rear Wheel Lift-up Mitigation) and with cornering function
Front wheel: Material/size
Aluminium alloy 3,50” x 17”
Rear wheel: Material/size
Aluminium alloy 6,00” x 17”
Front tyre
120/70 - ZR 17 M/C (58 W)
Rear tyre
200/55 - ZR 17 M/C (78 W)
Fairing material
Thermoplastic
Steering damper
Öhlins EC with electronic manual and automatic adjustment modes
Wheelbase
1.415 mm (55.71 in.)
Overall length
2.080 mm (81.89 in.)
Overall width
805 mm (31.69 in.)
Saddle height
845 mm (33.27 in.)
Min. ground clearance
141 mm (5.55 in.)
Trail
97 mm (3.82 in.)
Dry weight
186 kg (410.06 lbs.)
Fuel tank capacity
16 l (4.23 U.S. gal.)
Environmental Standard
Euro 5
Combined fuel consumption
6.8 l/100 km
CO2 Emissions
158 g/km
BRUTALE 1000 RR
Timing system
“D.O.H.C”, radial valve and DLC tappet
Total displacement
998 cm3 (60.9 cu. in.)
Compression ratio
13.4:1
Starting
Electric
Bore x stroke
79 mm x 50.9 mm (3.1 in. x 2.0 in.)
Max. power - rpm (at the crankshaft)
153,0 kW (208 hp) at 13.000 rpm
Max. torque - rpm
116,5 Nm (11,9 kgm) at 11.000 rpm
Cooling system
Cooling with separated liquid and oil radiators
Engine management system
Cooling with separated liquid and oil radiators Integrated ignition - injection system MVICS 2.1 (Motor & Vehicle Integrated Control System) with eight injectors (4 lower fuel injectors by Mikuni + 4 upper fuel injectors by Magneti Marelli with increased fuel flow). Engine control unit Eldor Nemo 2.1, throttle body bore 50 mm diameters full ride by wire Mikuni, pencil-coil with ion-sensing technology, control of detonation and misfire Torque control with four maps. Traction control with 8 levels + off and wheelie control with inertial platform
Electronic quick-shift
MV EAS 3.0 (Electronically Assisted Shift Up & Down)
Clutch
Wet, multi-disc with back torque limiting device and Brembo radial master cylinder/lever assembly
Transmission
Cassette style; six speed, constant mesh
Primary drive
48/82
First gear
14/37
Second gear
16/33
Third gear
18/31
Fourth gear
20/30
Fifth gear
22/29
Sixth gear
21/25
Final drive ratio
15/41
Maximum speed*
over 300 km/h (186 mph)
Acceleration
0-100 km/h in 3.15 s; 0-200 km/h in 8.30 s.
Voltage
12 V
Alternator
350 W at 5.000 rpm
Battery
Li-ion 12 V - 4.0 Ah
Frame type
CrMo Steel tubular trellis
Rear swing arm pivot plates material
Aluminium alloy - Adjustable swingarm pivot height
Front suspension type
Öhlins Nix EC hydraulic “upside down” front forks with TiN superficial treatment. Completely adjustable with electronically controlled compression and rebound damping with manually controlled spring preload.
Fork dia.
43 mm (1.69 in.)
Wheel travel
120 mm (4.72 in.)
Rear suspension type
Progressive, single shock absorber Öhlins EC TTX completely adjustable with electronically controlled compression and rebound damping and spring preload
Single sided swing arm material
Aluminium alloy
Wheel travel
120 mm (4.72 in.)
Front brake
Double floating disc with Ø 320 mm (Ø 12.6 in.) diameter, with steel braking disc and aluminium flange - Brembo radial master cylinder/level assembly
Front brake caliper
Brembo Stylema radial-type, single-piece with 4 pistons Ø 30 mm (Ø 1.18 in.)
Rear brake
Single steel disc with Ø 220 mm (Ø 8.66 in.) dia.- Brembo PS13 brake master cylinder
Rear brake caliper
Brembo with 2 pistons Ø 34 mm (Ø 1.34 in.)
ABS System
Continental MK100 with RLM (Rear Wheel Lift-up Mitigation) and with cornering function
Front wheel: Material/size
Forged aluminium alloy 3,50 ” x 17 ”
Rear wheel: Material/size
Forged aluminium alloy 6,00 ” x 17 ”
Front tyre
120/70 - ZR 17 M/C (58 W)
Rear tyre
200/55 - ZR 17 M/C (78 W)
Fairing material
Carbon fiber and thermoplastic material
Steering damper
Öhlins EC with electronic manual and automatic adjustment modes
Wheelbase
1.415 mm (55.71 in.)
Overall length
2.080 mm (81.89 in.)
Overall width
805 mm (31.69 in.)
Saddle height
845 mm (33.27 in.)
Min. ground clearance
141 mm (5.55 in.)
Trail
97 mm (3.82 in.)
Dry weight
186 kg (410.06 lbs.)
Fuel tank capacity
16 l (4.23 U.S. gal.)
Environmental Standard
Euro 5
Combined fuel consumption
6.8 l/100 km
CO2 Emissions
158 g/km
BRUTALE 1000 RR ASSEN
Timing system
“D.O.H.C”, radial valve and DLC tappet
Total displacement
998 cm3 (60.9 cu. in.)
Compression ratio
13.4:1
Starting
Electric
Bore x stroke
79 mm x 50.9 mm (3.1 in. x 2.0 in.)
Max. power - rpm (at the crankshaft)
153,0 kW (208 hp) at 13.000 rpm 156.0 kW (212 hp) at 13.600 rpm**
Max. torque - rpm
116,5 Nm (11,9 kgm) at 11.000 rpm
Cooling system
Cooling with separated liquid and oil radiators
Engine management system
Engine management system Integrated ignition - injection system MVICS 2.1 (Motor & Vehicle Integrated Control System) with eight injectors (4 lower fuel injectors by Mikuni + 4 upper fuel injectors by Magneti Marelli with increased fuel flow). Engine control unit Eldor Nemo 2.1, throttle body bore 50 mm diameters full ride by wire Mikuni, pencil-coil with ion-sensing technology, control of detonation and misfire. Torque control with four maps. Traction control with 8 levels + off and wheelie control with inertial measurement unit (IMU)
Electronic quick-shift
MV EAS 4.0 (Electronically Assisted Shift Up & Down)
Clutch
Wet, multi-disc with back torque limiting device and Brembo radial master cylinder/lever assembly
Transmission
Cassette style; six speed, constant mesh
Primary drive
48/82
First gear: Speed
14/37
Second gear: Speed
16/33
Third gear: Speed
18/31
Fourth gear: Speed
20/30
Fifth gear: Speed
22/29
Sixth gear: Speed
21/25
Final drive ratio
15/41
Maximum speed*
over 300 km/h (186 mph)
Acceleration
0-100 km/h in 3.15 s; 0-200 km/h in 8.30 s.
Voltage
12 V
Alternator
350 W at 5.000 rpm
Battery
Li-ion 12 V - 4.0 Ah
Frame type
CrMo Steel tubular trellis
Rear swing arm pivot plates material
Aluminium alloy - Adjustable swingarm pivot height
Front suspension type
Öhlins Nix EC hydraulic “upside down” front forks with TiN superficial treatment. Completely adjustable with electronically controlled compression and rebound damping with manually controlled spring preload.
Fork dia.
43 mm (1.69 in.)
Fork travel
120 mm (4.72 in.)
Rear suspension type
Progressive, single shock absorber Öhlins EC TTX completely adjustable with electronically controlled compression and rebound damping and spring preload
Single sided swing arm material
Aluminium alloy
Wheel travel
120 mm (4.72 in.)
Front brake
Double floating disc with Ø 320 mm (Ø 12.6 in.) diameter, with steel braking disc and aluminium flange - Brembo radial master cylinder/level assembly
Front brake caliper
Brembo Stylema radial-type, single-piece with 4 pistons Ø 30 mm (Ø 1.18 in.)
Rear brake
Single steel disc with Ø 220 mm (Ø 8.66 in.) dia.- Brembo PS13 brake master cylinder
Rear brake caliper
Brembo with 2 pistons Ø 34 mm (Ø 1.34 in.)
ABS System
Continental MK100 with RLM (Rear Wheel Lift-up Mitigation) and with cornering function
Front wheel: Material/size
Rotobox carbon fibre 3.50” x 17”
Rear wheel: Material/size
Rotobox carbon fibre 6.00” x 17”
Front tyre
120/70 - ZR 17 M/C (58 W)
Rear tyre
200/55 - ZR 17 M/C (78 W)
Fairing material
Carbon fiber and thermoplastic material
Steering damper
Öhlins EC with electronic manual and automatic adjustment modes
Wheelbase
1.415 mm (55.71 in.)
Overall length
2.080 mm (81.89 in.)
Overall width
805 mm (31.69 in.)
Saddle height
845 mm (33.27 in.)
Min. ground clearance
141 mm (5.55 in.)
Trail
97 mm (3.82 in.)
Dry weight
183 kg (403.45 lbs.) - 180 kg (396.83 lbs.)**
Fuel tank capacity
16 l (4.23 U.S. gal.)
Environmental Standard
Euro 5
Combined fuel consumption
6.8 l/100 km
CO2 Emissions
158 g/km
dRAGSTER
DRAGSTER R.
Timing system
“D.O.H.C” with mechanical chain tensioner and DLC tappet
Total displacement
798 cm3 (48.7 cu. in.)
Compression ratio
12.3:1
Starting
Electric
Bore x stroke
79 mm x 54.3 mm (3.1 in. x 2.1 in.)
Max. power - rpm (at the crankshaft)
82 kW (112 hp) at 11.000 rpm
Max. torque - rpm
85 Nm (8.67 kgm) at 8.500 rpm
Cooling system
Cooling with separated liquid and oil radiators
Engine management system
Integrated ignition - injection system MVICS 2.1 (Motor & Vehicle Integrated Control System) with three injectors. Engine control unit Eldor Nemo 2.1, throttle body bore 47 mm diameters pencil-coil with ion-sensing technology, control of detonation and misfire. Torque control with four maps.Traction control with eight levels of intervention.
Electronic quick-shift
MV EAS 3.0 (Electronically Assisted Shift Up & Down)
Clutch
Multi-disk wet clutch with hydraulic actuation and back torque limiting device
Transmission
Cassette style; six speed, constant mesh
Primary drive
22/41
First gear
13/37
Second gear
16/35
Third gear
18/32
Fourth gear
20/30
Fifth gear
22/29
Sixth gear
21/25
Final drive ratio
16/41
Maximum speed*
237.0 km/h (147.2 mph)
Acceleration
0-100 km/h in 3.75 s; 0-200 km/h in 12.30 s.
Voltage
12 V
Alternator
350 W at 5.000 rpm
Battery
12 V - 8.5 Ah
Frame type
ALS Steel tubular trellis
Rear swing arm pivot plates material
Aluminium alloy
Front suspension type
Marzocchi “UPSIDE DOWN” telescopic hydraulic fork with rebound-compression damping and spring preload external and separate adjustment
Fork dia.
43 mm (1.69 in.)
Wheel travel
125 mm (4.92 in.)
Rear suspension type
Progressive, Sachs single shock absorber with rebound and compression damping and spring preload adjustment
Single sided swing arm material
Aluminium alloy
Wheel travel
130 mm (5.12 in.)
Front brake
Double floating disc with Ø 320 mm (Ø 12.6 in.) diameter, with steel braking disc and flange
Front brake caliper
Brembo radial-type monobloc, with 4 pistons Ø 32 mm (Ø 1.26 in.)
Rear brake
Single steel disc with Ø 220 mm (Ø 8.66 in.) dia.
Rear brake caliper
Brembo with 2 pistons - Ø 34 mm (Ø 1.34 in.)
ABS System
Continental MK100 with RLM (Rear Wheel Lift-up Mitigation) and with cornering function
Front wheel: Material/size
Aluminium alloy 3.50” x 17”
Rear wheel: Material/size
Aluminium alloy 6.00” x 17”
Front tyre
120/70 - ZR 17 M/C (58 W)
Rear tyre
200/55 - ZR 17 M/C (78 W)
Fairing material
Thermoplastic
Wheelbase
1.400 mm (55.12 in.)
Overall length
2.035 mm (80.12 in.)
Overall width
935 mm (36.81 in.)
Saddle height
845 mm (33.27 in.)
Min. ground clearance
135 mm (5.31 in.)
Trail
103 mm (4.07 in.)
Dry weight
175 kg (385.8 lbs.)
Fuel tank capacity
16,5 l (4.36 U.S. gal.)
Environmental Standard
Euro 5
Combined fuel consumption
5.1 l/100 km
CO2 Emissions
117 g/km
DRAGSTER RR SCS
Timing system
“D.O.H.C” with mechanical chain tensioner and DLC tappet
Total displacement
798 cm3 (48.7 cu. in.)
Compression ratio
13.3:1
Starting
Electric
Bore x stroke
79 mm x 54.3 mm (3.1 in. x 2.1 in.)
Max. power - rpm (at the crankshaft)
103 kW (140 hp) at 12.300 rpm
Max. torque - rpm
87 Nm (8.87 kgm) at 10.250 rpm
Cooling system
Cooling with separated liquid and oil radiators.
Engine management system
Integrated ignition - injection system MVICS 2.1 (Motor & Vehicle Integrated Control System) with six injectors. Engine control unit Eldor Nemo 2.1, throttle body bore 50 mm diameters full ride by wire Mikuni, pencil-coil with ion-sensing technology, control of detonation and misfire. Torque control with four maps. Traction Control with eight levels of intervention with lean angle sensor.
Electronic quick-shift
MV EAS 3.0 (Electronically Assisted Shift Up & Down)
Clutch
Clutch S.C.S. 3.0 (Smart Clutch System) Radius CX automatic clutch with hydraulic actuation
Transmission
Cassette style; six speed, constant mesh
Primary drive
22/41
First gear
13/37
Second gear
16/34
Third gear
18/32
Fourth gear
19/30
Fifth gear
21/30
Sixth gear
22/29
Final drive ratio
16/41
Maximum speed*
244.0 km/h (151.6 mph)
Acceleration
0-100 km/h in 3.55 s; 0-200 km/h in 10.10 s.
Voltage
12 V
Alternator
350 W at 5.000 rpm
Battery
12 V - 8.5 Ah
Frame type
ALS Steel tubular trellis
Rear swing arm pivot plates material
Aluminium alloy
Front suspension type
Marzocchi “UPSIDE DOWN”, telescopic hydraulic fork with DLC treatment and anodized fork legs, rebound-compression damping and spring preload external and separate adjustment
Fork dia.
43 mm (1.69 in.)
Wheel travel
125 mm (4.92 in.)
Rear suspension type
Progressive, Sachs single shock absorber with rebound and compression damping and spring preload adjustment
Single sided swing arm material
Aluminium alloy
Wheel travel
130 mm (5.12 in.)
Front brake
Double floating disc with Ø 320 mm (Ø 12.6 in.) diameter, with steel braking disc and flange
Front brake caliper
Brembo radial-type, with 4 pistons Ø 32 mm (Ø 1.26 in.)
Rear brake
Single steel disc with Ø 220 mm (Ø 8.66 in.) dia.
Rear brake caliper
Brembo with 2 pistons - Ø 34 mm (Ø 1.34 in.)
ABS System
Continental MK100 with RLM (Rear Wheel Lift-up Mitigation) and with cornering function
Parking brake
Integrated in the rear hydraulic brake system
Front wheel: Material/size
Aluminium alloy spoked wheel 3.50” x 17”
Rear wheel: Material/size
Forged alluminium alloy wheel 6,00” x 17” with carbon fiber cover
Front tyre
120/70 - ZR 17 M/C (58 W)
Rear tyre
200/55 - ZR 17 M/C (78 W)
Fairing material
Thermoplastic
Wheelbase
1.400 mm (55.12 in.)
Overall length
2.035 mm (80.12 in.)
Overall width
935 mm (36.81 in.)
Saddle height
845 mm (33.27 in.)
Min. ground clearance
135 mm (5.31 in.)
Trail
103.5 mm (4.07 in.)
Dry weight
175 kg (385.80 lbs.)
Fuel tank capacity
16,5 l (4.36 U.S. gal.)
Environmental Standard
Euro 5
Combined fuel consumption
5.9 l/100 km
CO2 Emissions
138 g/km
DRAGSTER RC SCS
Timing system
“D.O.H.C” with mechanical chain tensioner and DLC tappet
Total displacement
798 cm3 (48.7 cu. in.)
Compression ratio
13.3:1
Starting
Electric
Bore x stroke
79 mm x 54.3 mm (3.1 in. x 2.1 in.)
Max. power - r.p.m. (at the crankshaft)
103 kW (140 hp) at 12.300 r.p.m.
Max. power - r.p.m. (at the crankshaft) **
109 kW (148 hp) at 12.800 r.p.m.**
Max. torque - r.p.m.
87 Nm (8.87 kgm) at 10.250 r.p.m.
Cooling system
Cooling with separated liquid and oil radiators.
Engine management system
Integrated ignition - injection system MVICS 2.1 (Motor & Vehicle Integrated Control System) with six injectors. Engine control unit Eldor Nemo 2.1, throttle body bore 50 mm diameters full ride by wire Mikuni, pencil-coil with ion-sensing technology, control of detonation and misfire. Torque control with four maps. Traction Control with eight levels of intervention with lean angle sensor.
Electronic quick-shift
MV EAS 3.0 (Electronically Assisted Shift Up & Down
Clutch
S.C.S. 2:0 (Smart Clutch System) Radius CX automatic clutch with hydraulic cluch actuation, wet multi-disc
Transmission
Cassette style; six speed, constant mesh
Primary drive
22/41
First gear: Speed
13/37
Second gear: Speed
16/34
Third gear: Speed
18/32
Fourth gear: Speed
19/30
Fifth gear: Speed
21/30
Sixth gear: Speed
22/29
Final drive ratio
16/41
Maximum speed*
244.0 km/h (151.6 mph)
Acceleration
0-100 km/h in 3.55 s 0-200 km/h in 10.10 s
Voltage
12 V
Alternator
350 W at 5.000 r.p.m.
Battery
12 V - 8.5 Ah
Frame type
ALS Steel tubular trellis
Rear swing arm pivot plates material
Aluminium alloy
Front suspension type
Marzocchi “UPSIDE DOWN” telescopic hydraulic fork with TIN treatment aluminium and anodized fork legs, rebound-compression damping and spring preload external and separate adjustment
Fork dia.
43 mm (1.69 in.)
Fork travel
125 mm (4.92 in.)
Rear suspension type
Progressive, Sachs single shock absorber with rebound and compression damping and spring preload adjustment
Single sided swing arm material
Aluminium alloy
Wheel travel
130 mm (5.12 in.)
Front brake
Double floating disc with Ø 320 mm (Ø 12.6 in.) diameter, with steel braking disc and flange
Front brake caliper
Brembo radial-type, with 4 pistons Ø 32 mm (Ø 1.26 in.)
Rear brake
Single steel disc with Ø 220 mm (Ø 8.66 in.) dia.
Rear brake caliper
Brembo with 2 pistons - Ø 34 mm (Ø 1.34 in.)
ABS System
Continental MK100 with RLM (Rear Wheel Lift-up Mitigation) and with cornering function
Parking brake
Integrated in the rear hydraulic brake system
Front wheel: Material/size
Forged aluminium alloy 3.50” x 17”
Rear wheel: Material/size
Forged aluminium alloy 6.00” x 17”
Front tyre
120/70 - ZR 17 M/C (58 W)
Rear tyre
200/55 - ZR 17 M/C (78 W)
Fairing material
Carbon fiber and thermoplastic
Steering damper
Steering damper manually adjustable with 8 settings
Rider’s footpegs
Additional CNC rider footpegs (supplied)
Wheelbase
1.400 mm (55.12 in.)
Overall length
2.035 mm (80.51 in.)
Overall width
935 mm (36.81 in.)
Saddle height
845 mm (33.27 in.)
Min. ground clearance
135 mm (5.31 in.)
Trail
103.5 mm (4.07 in.)
Dry weight
168 kg (370.38 lbs.) - 160 kg (352.74 lbs.)**
Fuel tank capacity
16,5 l (4.36 U.S. gal.)
Combined fuel consumption
5.9 l/100 km
Environmental Standard
Euro 5
CO2 Emissions
138 g/km
turismo veloce
TURISMO VELOCE R
Timing system
“D.O.H.C” with mechanical chain tensioner and DLC tappet
Total displacement
798 cm3 (48.7 cu. in.)
Compression ratio
12.3:1
Starting
Electric
Bore x stroke
79 mm x 54.3 mm (3.1 in. x 2.1 in.)
Max. power - rpm (at the crankshaft)
81 kW (110 hp) at 11.000 rpm
Max. torque - rpm
84 Nm (8.57 kgm) at 8.500 r.p.m
Cooling system
Cooling with separated liquid and oil radiators
Engine management system
Integrated ignition - injection system MVICS 2.1 (Motor & Vehicle Integrated Control System) with three injectors. Engine control unit Eldor Nemo 2.1, throttle body bore 47 mm diameters full ride by wire Mikuni, pencil-coil with ion-sensing technology, control of detonation and misfire. Torque control with four maps. Traction Control with eight levels of intervention with lean angle sensor
Electronic quick-shift
MV EAS 3.0 (Electronically Assisted Shift Up & Down)
Clutch
Hydraulic, wet, multi-disc with slipper clutch
Transmission
Cassette style; six speed, constant mesh
Primary drive
22/41
First gear
13/40
Second gear
16/35
Third gear
18/30
Fourth gear
21/29
Fifth gear
23/28
Sixth gear
26/29
Final drive ratio
16/39
Maximum speed*
230 km/h (143 mph)
Acceleration
0-100 km/h in 3.95 s; 0-200 km/h in 16.40 s.
Voltage
12 V
Alternator
450 W at 5.000 rpm
Battery
12 V - 11 Ah
Frame type
ALS Steel tubular trellis (MAG welded)
Rear swing arm pivot plates material
Aluminium alloy
Front suspension type
Marzocchi “UPSIDE DOWN” telescopic hydraulic fork with rebound-compression damping and spring preload external and separate adjustment
Fork dia.
43 mm (1.69 in.)
Fork travel
160 mm (6.30 in.)
Rear suspension type
Progressive, Sachs single shock absorber with rebound and compression damping and spring preload adjustment
Single sided swing arm material
Aluminium alloy
Wheel travel
165 mm (6.50 in.)
Front brake
Double floating disc with Ø 320 mm (Ø 12.6 in.) diameter, with steel braking disc and flange
Front brake caliper
Brembo radial-type, with 4 pistons Ø 32 mm (Ø 1.26 in.)
Rear brake
Single steel disc with Ø 220 mm (Ø 8.66 in.) dia.
Rear brake caliper
Brembo with 2 pistons - Ø 34 mm (Ø 1.34 in.
ABS System
Continental MK100 with RLM (Rear Wheel) Lift-up Mitigation) and with cornering function
Front wheel: Material/size
Aluminium alloy 3.50” x 17”
Rear wheel: Material/size
Aluminium alloy 6.00” x 17”
Front tyre
120/70 - ZR 17 M/C (58 W)
Rear tyre
190/55 - ZR 17 M/C (75 W)
Fairing material
Thermoplastic
Wheelbase
1.445 mm (56.89 in.)
Overall length
2.125 mm (83.66 in.)
Overall width
910 mm (35.83 in.)
Saddle height
830 mm (32.68 in.)
Min. ground clearance
140 mm (5.51 in.)
Trail
108 mm (4.25 in.)
Dry weight
191 kg (421.1 lbs.)
Fuel tank capacity
21.5 l (5.68 U.S. gal.)
Environmental Standard
Euro 5
Combined fuel consumption
5.5 l/100 km
CO2 Emissions
128 g/km
TURISMO VELOCE LUSSO SCS
Timing system
“D.O.H.C” with mechanical chain tensioner and DLC tappet
Total displacement
798 cm3 (48.7 cu. in.)
Compression ratio
12.3:1
Starting
Electric
Bore x stroke
79 mm x 54.3 mm (3.1 in. x 2.1 in.)
Max. power - rpm (at the crankshaft)
81 kW (110 hp) at 11.000 rpm
Max. torque - rpm
84 Nm (8.57 kgm) at 8.500 r.p.m
Cooling system
Cooling with separated liquid and oil radiators
Engine management system
Integrated ignition - injection system MVICS 2.1 (Motor & Vehicle Integrated Control System) with three injectors. Engine control unit Eldor Nemo 2.1, throttle body bore 47 mm diameters full ride by wire Mikuni, pencil-coil with ion-sensing technology, control of detonation and misfire. Torque control with four maps. Traction Control with eight levels of intervention with lean angle sensor
Electronic quick-shift
MV EAS 3.0 (Electronically Assisted Shift Up & Down)
Clutch
S.C.S. 3.0 (Smart Clutch System) Radius CX
Transmission
Cassette style; six speed, constant mesh
Primary drive
22/41
First gear
13/40
Second gear
16/35
Third gear
18/30
Fourth gear
21/29
Fifth gear
23/28
Sixth gear
26/29
Final drive ratio
16/39
Maximum speed*
230 km/h (143 mph)
Acceleration
0-100 km/h in 3.75 s; 0-200 km/h in 15.00 s.
Voltage
12 V
Alternator
450 W at 5.000 rpm
Battery
12 V - 11 Ah
Frame type
ALS Steel tubular trellis (MAG welded)
Rear swing arm pivot plates material
Aluminium alloy
Front suspension type
Sachs “UPSIDE DOWN” semi-active telescopic hydraulic fork MVCSC (MV Agusta Chassis Stability Control)
Fork dia.
43 mm (1.69 in.)
Wheel travel
160 mm (6.30 in.)
Rear suspension type
Progressive, Sachs semi-active single shock absorber with hydraulic spring preload adjustment MVCSC (MV Agusta Chassis Stability Control)
Single sided swing arm material
Aluminium alloy
Wheel travel
165 mm (6.50 in.)
Front brake
Double floating disc with Ø 320 mm (Ø 12.6 in.) diameter, with steel braking disc and flange
Front brake caliper
Brembo radial-type, with 4 pistons Ø 32 mm (Ø 1.26 in.)
Rear brake
Single steel disc with Ø 220 mm (Ø 8.66 in.) dia.
Rear brake caliper
Brembo with 2 pistons - Ø 34 mm (Ø 1.34 in.).
ABS System
Continental MK100 with RLM (Rear Wheel Lift-up Mitigation) and with cornering function
Parking brake
Integrated in the rear hydraulic brake system
Front wheel: Material/size
Aluminium alloy 3.50” x 17”
Rear wheel: Material/size
Aluminium alloy 6.00” x 17”
Front tyre
120/70 - ZR 17 M/C (58 W)
Rear tyre
190/55 - ZR 17 M/C (75 W)
Fairing material
Thermoplastic
Wheelbase
1.445 mm (56.89 in.)
Overall length
2.125 mm (83.66 in.)
Overall width
910 mm (35.83 in.)
Saddle height
830 mm (32.68 in.)
Min. ground clearance
140 mm (5.51 in.)
Trail
108 mm (4.25 in.)
Dry weight
199 kg (438.72 lbs.)
Fuel tank capacity
21.5 l (5.68 U.S. gal.)
Environmental Standard
Euro 5
Combined fuel consumption
5.5 l/100 km
CO2 Emissions
128 g/km
TURISMO VELOCE RC SCS
Timing system
“D.O.H.C” with mechanical chain tensioner and DLC tappet
Total displacement
798 cm3 (48.7 cu. in.)
Compression ratio
12.3:1
Starting
Electric
Bore x stroke
79 mm x 54.3 mm (3.1 in. x 2.1 in.)
Max. power - r.p.m. (at the crankshaft)
81 kW (110 hp) at 11.000 r.p.m.
Max. torque - r.p.m.
84 Nm (8.57 kgm) at 8.500 r.p.m
Cooling system
Cooling with separated liquid and oil radiators
Engine management system
Integrated ignition - injection system MVICS 2.1 (Motor & Vehicle Integrated Control System) with three injectors. Engine control unit Eldor Nemo 2.1, throttle body bore 47 mm diameters full ride by wire Mikuni, pencil-coil with ion-sensing technology, control of detonation and misfire. Torque control with four maps. Traction Control with eight levels of intervention with lean angle sensor
Electronic quick-shift
MV EAS 3.0 (Electronically Assisted Shift Up & Down)
Clutch
S.C.S. 2.0 (Smart Clutch System) Radius CX automatic clutch with hydraulic clutch actuation, wet multi-disc
Transmission
Cassette style; six speed, constant mesh
Primary drive
22/41
First gear: Speed
13/40
Second gear: Speed
16/35
Third gear: Speed
18/30
Fourth gear: Speed
21/29
Fifth gear: Speed
23/28
Sixth gear: Speed
26/29
Final drive ratio
16/39
Maximum speed*
230 km/h (143 mph)
Acceleration
0-100 km/h in 3.75 s 0-200 km/h in 15.00 s
Voltage
12 V
Alternator
450 W at 5.000 r.p.m.
Battery
12 V - 11 Ah
Frame type
ALS Steel tubular trellis (MAG welded)
Rear swing arm pivot plates material
Aluminium alloy
Front suspension type
Sachs “UPSIDE DOWN” semi-active telescopic hydraulic fork MVCSC (MV Agusta Chassis Stability Control)
Fork dia.
43 mm (1.69 in.)
Fork travel
160 mm (6.30 in.)
Rear suspension type
Progressive, Sachs semi-active single shock absorber with hydraulic spring preload adjustment MVCSC (MV Agusta Chassis Stability Control)
Single sided swing arm material
Aluminium alloy
Wheel travel
165 mm (6.50 in.)
Front brake
Double floating disc with Ø 320 mm (Ø 12.6 in.) diameter, with steel braking disc and flange
Front brake caliper
Brembo radial-type, with 4 pistons Ø 32 mm (Ø 1.26 in.)
Rear brake
Single steel disc with Ø 220 mm (Ø 8.66 in.) dia.
Rear brake caliper
Brembo with 2 pistons - Ø 34 mm (Ø 1.34 in.
ABS System
Continental MK100 with RLM (Rear Wheel Lift-up Mitigation) and with cornering function
Parking brake
integrated in the rear hydraulic brake system
Front wheel: Material/size
Aluminium alloy 3.50” x 17”
Rear wheel: Material/size
Aluminium alloy 6.00” x 17”
Front tyre
120/70 - ZR 17 M/C (58 W)
Rear tyre
190/55 - ZR 17 M/C (75 W)
Fairing material
Thermoplastic
Wheelbase
1.445 mm (56.89 in.)
Overall length
2.125 mm (83.66 in.)
Overall width
910 mm (35.83 in.)
Saddle height
830 mm (32.68 in.)
Min. ground clearance
140 mm (5.51 in.)
Trail
108 mm (4.25 in.)
Dry weight
199 kg (438.72 lbs.)
Fuel tank capacity
21.5 l (5.68 U.S. gal.)
Environmental Standard
Euro 5
Combined fuel consumption
5.5 l/100 km
CO2 Emissions
128 g/km
f
3
F3 R
Timing system
“D.O.H.C” with mechanical chain tensioner and DLC tappet
Total displacement
798 cm3 (48.7 cu. in.)
Compression ratio
13.3:1
Starting
Electric
Bore x stroke
79 mm x 54.3 mm (3.1 in. x 2.1 in.)
Max. power - rpm (at the crankshaft)
108 kW (147 hp) at 13.000 rpm
Max. torque - rpm
88 Nm (8.98 kgm) at 10.100 rpm
Cooling system
Cooling with separated liquid and oil radiators
Engine management system
Integrated ignition - injection system MVICS 2.1 (Motor & Vehicle Integrated Control System) with six injectors. Engine control unit Eldor Nemo 2.1, throttle body bore 50 mm diameters full ride by wire Mikuni, pencil-coil with ion- sensing technology, control of detonation and misfire. Torque control with four maps. Traction Control with eight levels of intervention
Electronic quick-shift
MV EAS 3.0 (Electronically Assisted Shift Up & Down)
Clutch
Wet, multi-disc slipper clutch
Transmission
Cassette style; six speed, constant mesh
Primary drive
22/41
First gear
13/37
Second gear
16/34
Third gear
18/32
Fourth gear
19/30
Fifth gear
21/30
Sixth gear
22/29
Final drive ratio
17/43
Maximum speed*
240.0 km/h (149.1 mph)
Acceleration
0-100 km/h in 3.05 s; 0-200 km/h in 9.00 s.
Voltage
12 V
Alternator
350 W at 5.000 rpm
Battery
12 V - 8.6 Ah
Frame type
ALS Steel tubular trellis
Rear swing arm pivot plates material
Aluminium alloy
Front suspension type
Marzocchi “UPSIDE DOWN” telescopic hydraulic fork, with rebound-compression damping and spring preload external and separate adjustment
Fork dia.
43 mm (1.69 in.)
Wheel travel
125 mm (4.92 in.)
Rear suspension type
Progressive, Sachs single shock absorber with rebound and compression damping and spring preload adjustment
Single sided swing arm material
Aluminium alloy
Wheel travel
130 mm (5.12 in.)
Front brake
Double floating disc with Ø 320 mm (Ø 12.6 in.) diameter, with steel braking disc and flange
Front brake caliper
Brembo Stylema radial-type, with 4 pistons Ø 34 mm (Ø 1.34 in.)
Rear brake
Single steel disc with Ø 220 mm (Ø 8.66 in.) dia.
Rear brake caliper
Brembo with 2 pistons - Ø 30 mm (Ø 1.18 in.).
ABS System
Continental MK100 with RLM (Rear Wheel Lift-up Mitigation) and with cornering function
Front wheel: Material/size
Alluminium alloy 3.50” x 17”
Rear wheel: Material/size
Alluminium alloy 5.50” x 17”
Front tyre
120/70 - ZR 17 M/C (58 W)
Rear tyre
180/55 - ZR 17 M/C (73 W)
Fairing material
Thermoplastic - Aluminium belly-pan
Wheelbase
1.380 mm (54.33 in.)
Overall length
2.030 mm (79.92 in.)
Overall width
730 mm (28.74 in.)
Saddle height
830 mm (32.68 in.)
Min. ground clearance
120 mm (4.72 in.)
Trail
99 mm (3.89 in.)
Dry weight
173 kg (381.4 lbs.)
Fuel tank capacity
16,5 l (4.36 U.S. gal.)
Environmental Standard
Euro 5
Combined fuel consumption
6.1 l/100 km
CO2 Emissions
139 g/km
“D.O.H.C” with mechanical chain tensioner and DLC tappet
Total displacement
798 cm3 (48.7 cu. in.)
Compression ratio
13.3:1
Starting
Electric
Bore x stroke
79 mm x 54.3 mm (3.1 in. x 2.1 in.)
Max. power - rpm (at the crankshaft)
108 kW (147 hp) at 13.000 rpm
Max. torque - rpm
88 Nm (8.98 kgm) at 10.100 rpm
Cooling system
Cooling with separated liquid and oil radiators
Engine management system
Integrated ignition - injection system MVICS 2.1 (Motor & Vehicle Integrated Control System) with six injectors. Engine control unit Eldor Nemo 2.1, throttle body bore 50 mm diameters full ride by wire Mikuni, pencil-coil with ion- sensing technology, control of detonation and misfire. Torque control with four maps. Traction Control with eight levels of intervention
Electronic quick-shift
MV EAS 3.0 (Electronically Assisted Shift Up & Down)
Clutch
Wet, multi-disc slipper clutch
Transmission
Cassette style; six speed, constant mesh
Primary drive
22/41
First gear
13/37
Second gear
16/34
Third gear
18/32
Fourth gear
19/30
Fifth gear
21/30
Sixth gear
22/29
Final drive ratio
17/43
Maximum speed*
240.0 km/h (149.1 mph)
Acceleration
0-100 km/h in 3.05 s; 0-200 km/h in 9.00 s.
Voltage
12 V
Alternator
350 W at 5.000 rpm
Battery
12 V - 8.6 Ah
Frame type
ALS Steel tubular trellis
Rear swing arm pivot plates material
Aluminium alloy
Front suspension type
Marzocchi “UPSIDE DOWN” telescopic hydraulic fork, with rebound-compression damping and spring preload external and separate adjustment
Fork dia.
43 mm (1.69 in.)
Wheel travel
125 mm (4.92 in.)
Rear suspension type
Progressive, Sachs single shock absorber with rebound and compression damping and spring preload adjustment
Single sided swing arm material
Aluminium alloy
Wheel travel
130 mm (5.12 in.)
Front brake
Double floating disc with Ø 320 mm (Ø 12.6 in.) diameter, with steel braking disc and flange
Front brake caliper
Brembo Stylema radial-type, with 4 pistons Ø 34 mm (Ø 1.34 in.)
Rear brake
Single steel disc with Ø 220 mm (Ø 8.66 in.) dia.
Rear brake caliper
Brembo with 2 pistons - Ø 30 mm (Ø 1.18 in.).
ABS System
Continental MK100 with RLM (Rear Wheel Lift-up Mitigation) and with cornering function
Front wheel: Material/size
Alluminium alloy 3.50” x 17”
Rear wheel: Material/size
Alluminium alloy 5.50” x 17”
Front tyre
120/70 - ZR 17 M/C (58 W)
Rear tyre
180/55 - ZR 17 M/C (73 W)
Fairing material
Thermoplastic - Aluminium belly-pan
Wheelbase
1.380 mm (54.33 in.)
Overall length
2.030 mm (79.92 in.)
Overall width
730 mm (28.74 in.)
Saddle height
830 mm (32.68 in.)
Min. ground clearance
120 mm (4.72 in.)
Trail
99 mm (3.89 in.)
Dry weight
173 kg (381.4 lbs.)
Fuel tank capacity
16,5 l (4.36 U.S. gal.)
Environmental Standard
Euro 5
Combined fuel consumption
6.1 l/100 km
CO2 Emissions
139 g/km
F3 RR
Type
Three cylinders, 4 stroke, 12 valves
Timing system
“D.O.H.C” with mechanical chain tensioner and DLC tappet
Total displacement
798 cm3 (48.7 cu. in.)
Compression ratio
13.3:1
Starting
Electric
Bore x stroke
79 mm x 54.3 mm (3.1 in. x 2.1 in.)
Max. power - rpm (at the crankshaft)
108 kW (147 hp) at 13.000 rpm
Max. power - rpm (at the crankshaft) **
114 kW (155 hp) at 13.250 rpm**
Max. torque - rpm
88 Nm (8.98 kgm) at 10.100 rpm
Cooling system
Cooling with separated liquid and oil radiators
Engine management system
Integrated ignition - injection system MVICS 2.1 (Motor & Vehicle Integrated Control System) with six injectors. Engine control unit Eldor Nemo 2.1, throttle body bore 50 mm diameters full ride by wire Mikuni, pencil-coil with ion- sensing technology, control of detonation and misfire. Torque control with four maps. Traction Control with eight levels of intervention
Electronic quick-shift
MV EAS 3.0 (Electronically Assisted Shift Up & Down)
Clutch
Wet, multi-disc slipper clutch
Transmission
Cassette style; six speed, constant mesh
Primary drive
22/41
First gear
13/37
Second gear
16/34
Third gear
18/32
Fourth gear
19/30
Fifth gear
21/30
Sixth gear
22/29
Final drive ratio
17/43
Maximum speed*
240.0 km/h (149.1 mph)
Acceleration
0-100 km/h in 2.97 s; 0-200 km/h in 8.40 s.
Voltage
12 V
Alternator
350 W at 5.000 rpm
Battery
12 V - 8.6 Ah
Frame type
ALS Steel tubular trellis
Rear swing arm pivot plates material
Aluminium alloy
Front suspension type
Type Marzocchi “upside-down” telescopic hydraulic fork with TiN low friction treatment; external compression, rebound and spring preload adjustment
Fork dia.
43 mm (1.69 in.)
Wheel travel
125 mm (4.92 in.)
Rear suspension type
Progressive, Sachs single shock absorber with rebound and compression damping and spring preload adjustment
Single sided swing arm material
Aluminium alloy
Wheel travel
130 mm (5.12 in.)
Front brake
Double floating disc with Ø 320 mm (Ø 12.6 in.) diameter, with steel braking disc and flange
Front brake caliper
Brembo Stylema radial-type monobloc, with 4 pistons Ø 30 mm (Ø 1.18 in.).
Rear brake
Single steel disc with Ø 220 mm (Ø 8.66 in.) dia.
Rear brake caliper
Brembo with 2 pistons - Ø 34 mm (Ø 1.34 in.)
ABS System
Continental MK100 with RLM (Rear Wheel Lift-up Mitigation) and with cornering function
Front wheel: Material/size
Alluminium alloy 3.50” x 17”
Rear wheel: Material/size
Alluminium alloy 5.50” x 17”
Front tyre
120/70 - ZR 17 M/C (58 W)
Rear tyre
180/55 - ZR 17 M/C (73 W)
Fairing material
Thermoplastic - Carbon fiber Aluminium belly-pan
Wheelbase
1.380 mm (54.33 in.)
Overall length
2.030 mm (79.92 in.)
Overall width
730 mm (28.74 in.)
Saddle height
830 mm (32.68 in.)
Min. ground clearance
120 mm (4.72 in.)
Trail
99 mm (3.89 in.)
Dry weight
173 kg (381.4 lbs.) - 165 kg (363,8 lbs.)**
Fuel tank capacity
16,5 l (4.36 U.S. gal.)
Environmental Standard
Euro 5
Combined fuel consumption
6.1 l/100 km
CO2 Emissions
139 g/km
Three cylinders, 4 stroke, 12 valves
Timing system
“D.O.H.C” with mechanical chain tensioner and DLC tappet
Total displacement
798 cm3 (48.7 cu. in.)
Compression ratio
13.3:1
Starting
Electric
Bore x stroke
79 mm x 54.3 mm (3.1 in. x 2.1 in.)
Max. power - rpm (at the crankshaft)
108 kW (147 hp) at 13.000 rpm
Max. power - rpm (at the crankshaft) **
114 kW (155 hp) at 13.250 rpm**
Max. torque - rpm
88 Nm (8.98 kgm) at 10.100 rpm
Cooling system
Cooling with separated liquid and oil radiators
Engine management system
Integrated ignition - injection system MVICS 2.1 (Motor & Vehicle Integrated Control System) with six injectors. Engine control unit Eldor Nemo 2.1, throttle body bore 50 mm diameters full ride by wire Mikuni, pencil-coil with ion- sensing technology, control of detonation and misfire. Torque control with four maps. Traction Control with eight levels of intervention
Electronic quick-shift
MV EAS 3.0 (Electronically Assisted Shift Up & Down)
Clutch
Wet, multi-disc slipper clutch
Transmission
Cassette style; six speed, constant mesh
Primary drive
22/41
First gear
13/37
Second gear
16/34
Third gear
18/32
Fourth gear
19/30
Fifth gear
21/30
Sixth gear
22/29
Final drive ratio
17/43
Maximum speed*
240.0 km/h (149.1 mph)
Acceleration
0-100 km/h in 2.97 s; 0-200 km/h in 8.40 s.
Voltage
12 V
Alternator
350 W at 5.000 rpm
Battery
12 V - 8.6 Ah
Frame type
ALS Steel tubular trellis
Rear swing arm pivot plates material
Aluminium alloy
Front suspension type
Type Marzocchi “upside-down” telescopic hydraulic fork with TiN low friction treatment; external compression, rebound and spring preload adjustment
Fork dia.
43 mm (1.69 in.)
Wheel travel
125 mm (4.92 in.)
Rear suspension type
Progressive, Sachs single shock absorber with rebound and compression damping and spring preload adjustment
Single sided swing arm material
Aluminium alloy
Wheel travel
130 mm (5.12 in.)
Front brake
Double floating disc with Ø 320 mm (Ø 12.6 in.) diameter, with steel braking disc and flange
Front brake caliper
Brembo Stylema radial-type monobloc, with 4 pistons Ø 30 mm (Ø 1.18 in.).
Rear brake
Single steel disc with Ø 220 mm (Ø 8.66 in.) dia.
Rear brake caliper
Brembo with 2 pistons - Ø 34 mm (Ø 1.34 in.)
ABS System
Continental MK100 with RLM (Rear Wheel Lift-up Mitigation) and with cornering function
Front wheel: Material/size
Alluminium alloy 3.50” x 17”
Rear wheel: Material/size
Alluminium alloy 5.50” x 17”
Front tyre
120/70 - ZR 17 M/C (58 W)
Rear tyre
180/55 - ZR 17 M/C (73 W)
Fairing material
Thermoplastic - Carbon fiber Aluminium belly-pan
Wheelbase
1.380 mm (54.33 in.)
Overall length
2.030 mm (79.92 in.)
Overall width
730 mm (28.74 in.)
Saddle height
830 mm (32.68 in.)
Min. ground clearance
120 mm (4.72 in.)
Trail
99 mm (3.89 in.)
Dry weight
173 kg (381.4 lbs.) - 165 kg (363,8 lbs.)**
Fuel tank capacity
16,5 l (4.36 U.S. gal.)
Environmental Standard
Euro 5
Combined fuel consumption
6.1 l/100 km
CO2 Emissions
139 g/km
F3 RC
Type
Three cylinders, 4 stroke, 12 valves
Timing system
“D.O.H.C” with mechanical chain tensioner and DLC tappet
Total displacement
798 cm3 (48.7 cu. in.)
Compression ratio
13.3:1
Starting
Electric
Bore x stroke
79 mm x 54.3 mm (3.1 in. x 2.1 in.)
Max. power - r.p.m. (at the crankshaft)
108 kW (147 hp) at 13.000 r.p.m.
Max. power - r.p.m. (at the crankshaft) **
114 kW (155 hp) at 13.250 r.p.m.**
Max. torque - r.p.m.
88 Nm (8.98 kgm) at 10.100 r.p.m.
Cooling system
Cooling with separated liquid and oil radiators
Engine management system
Integrated ignition - injection system MVICS 2.1 (Motor & Vehicle Integrated Control System) with six injectors. Engine control unit Eldor Nemo 2.1, throttle body bore 50 mm diameters full ride by wire Mikuni, pencil-coil with ion- sensing technology, control of detonation and misfire. Torque control with four maps. Traction Control with eight levels of intervention
Electronic quick-shift
MV EAS 3.0 (Electronically Assisted Shift Up & Down)
Clutch
Wet, multi-disc slipper clutch
Transmission
Cassette style; six speed, constant mesh
Primary drive
22/41
First gear: Speed
13/37
Second gear: Speed
16/34
Third gear: Speed
18/32
Fourth gear: Speed
19/30
Fifth gear: Speed
21/30
Sixth gear: Speed
22/29
Final drive ratio
17/43
Maximum speed*
240.0 km/h (149.1 mph)
Acceleration
0-100 km/h in 2.97 s** 0-200 km/h in 8.40 s**
Voltage
12 V
Alternator
350 W at 5.000 r.p.m.
Battery
12 V - 8.6 Ah
Frame type
ALS Steel tubular trellis
Rear swing arm pivot plates material
Aluminium alloy
Front suspension type
Marzocchi “UPSIDE DOWN” telescopic hydraulic fork with TIN treatment and compression rebound-damping and spring pre load external and separate adjustment
Fork dia.
43 mm (1.69 in.)
Fork travel
125 mm (4.92 in.)
Rear suspension type
Progressive Sachs, single shock absorber with rebound and compression damping and spring preload adjustment
Single sided swing arm material
Aluminium alloy
Wheel travel
130 mm (5.12 in.)
Front brake
Double floating disc with Ø 320 mm (Ø 12.6 in.) diameter, with steel braking disc and flange
Front brake caliper
Brembo radial-type monobloc, with 4 pistons Ø 34 mm (Ø 1.34 in.)
Rear brake
Single steel disc with Ø 220 mm (Ø 8.66 in.) dia.
Rear brake caliper
Brembo with 2 pistons - Ø 34 mm (Ø 1.34 in.)
ABS System
Continental MK100 with RLM (Rear Wheel Lift-up Mitigation) and with cornering function
Front wheel: Material/size
Alluminium alloy 3.50” x 17”
Rear wheel: Material/size
Alluminium alloy 5.50” x 17”
Front tyre
120/70 - ZR 17 M/C (58 W)
Rear tyre
180/55 - ZR 17 M/C (73 W)
Fairing material
Thermoplastic - Carbon fiber Aluminium belly-pan
Wheelbase
1.380 mm (54.33 in.)
Overall length
2.030 mm (79.92 in.)
Overall width
730 mm (28.74 in.)
Saddle height
830 mm (32.68 in.)
Min. ground clearance
120 mm (4.72 in.)
Trail
99 mm (3.89 in.)
Dry weight
173 kg (381.4 lbs.) - 165 kg (363,8 lbs.)**
Fuel tank capacity
16,5 l (4.36 U.S. gal.)
Environmental Standard
Euro 5
Combined fuel consumption
6.1 l/100 km
CO2 Emissions
139 g/km
Three cylinders, 4 stroke, 12 valves
Timing system
“D.O.H.C” with mechanical chain tensioner and DLC tappet
Total displacement
798 cm3 (48.7 cu. in.)
Compression ratio
13.3:1
Starting
Electric
Bore x stroke
79 mm x 54.3 mm (3.1 in. x 2.1 in.)
Max. power - r.p.m. (at the crankshaft)
108 kW (147 hp) at 13.000 r.p.m.
Max. power - r.p.m. (at the crankshaft) **
114 kW (155 hp) at 13.250 r.p.m.**
Max. torque - r.p.m.
88 Nm (8.98 kgm) at 10.100 r.p.m.
Cooling system
Cooling with separated liquid and oil radiators
Engine management system
Integrated ignition - injection system MVICS 2.1 (Motor & Vehicle Integrated Control System) with six injectors. Engine control unit Eldor Nemo 2.1, throttle body bore 50 mm diameters full ride by wire Mikuni, pencil-coil with ion- sensing technology, control of detonation and misfire. Torque control with four maps. Traction Control with eight levels of intervention
Electronic quick-shift
MV EAS 3.0 (Electronically Assisted Shift Up & Down)
Clutch
Wet, multi-disc slipper clutch
Transmission
Cassette style; six speed, constant mesh
Primary drive
22/41
First gear: Speed
13/37
Second gear: Speed
16/34
Third gear: Speed
18/32
Fourth gear: Speed
19/30
Fifth gear: Speed
21/30
Sixth gear: Speed
22/29
Final drive ratio
17/43
Maximum speed*
240.0 km/h (149.1 mph)
Acceleration
0-100 km/h in 2.97 s** 0-200 km/h in 8.40 s**
Voltage
12 V
Alternator
350 W at 5.000 r.p.m.
Battery
12 V - 8.6 Ah
Frame type
ALS Steel tubular trellis
Rear swing arm pivot plates material
Aluminium alloy
Front suspension type
Marzocchi “UPSIDE DOWN” telescopic hydraulic fork with TIN treatment and compression rebound-damping and spring pre load external and separate adjustment
Fork dia.
43 mm (1.69 in.)
Fork travel
125 mm (4.92 in.)
Rear suspension type
Progressive Sachs, single shock absorber with rebound and compression damping and spring preload adjustment
Single sided swing arm material
Aluminium alloy
Wheel travel
130 mm (5.12 in.)
Front brake
Double floating disc with Ø 320 mm (Ø 12.6 in.) diameter, with steel braking disc and flange
Front brake caliper
Brembo radial-type monobloc, with 4 pistons Ø 34 mm (Ø 1.34 in.)
Rear brake
Single steel disc with Ø 220 mm (Ø 8.66 in.) dia.
Rear brake caliper
Brembo with 2 pistons - Ø 34 mm (Ø 1.34 in.)
ABS System
Continental MK100 with RLM (Rear Wheel Lift-up Mitigation) and with cornering function
Front wheel: Material/size
Alluminium alloy 3.50” x 17”
Rear wheel: Material/size
Alluminium alloy 5.50” x 17”
Front tyre
120/70 - ZR 17 M/C (58 W)
Rear tyre
180/55 - ZR 17 M/C (73 W)
Fairing material
Thermoplastic - Carbon fiber Aluminium belly-pan
Wheelbase
1.380 mm (54.33 in.)
Overall length
2.030 mm (79.92 in.)
Overall width
730 mm (28.74 in.)
Saddle height
830 mm (32.68 in.)
Min. ground clearance
120 mm (4.72 in.)
Trail
99 mm (3.89 in.)
Dry weight
173 kg (381.4 lbs.) - 165 kg (363,8 lbs.)**
Fuel tank capacity
16,5 l (4.36 U.S. gal.)
Environmental Standard
Euro 5
Combined fuel consumption
6.1 l/100 km
CO2 Emissions
139 g/km
SUPERVELOCE 800
Timing system
“D.O.H.C” with mechanical chain tensioner and DLC tappet
Total displacement
798 cm3 (48.7 cu. in.)
Compression ratio
13.3:1
Starting
Electric
Bore x stroke
79 mm x 54.3 mm (3.1 in. x 2.1 in.)
Max. power - rpm (at the crankshaft)
108 kW (147 hp) at 13.000 rpm
Max. torque - rpm
88 Nm (8.98 kgm) at 10.100 rpm
Cooling system
Cooling with separated liquid and oil radiators
Engine management system
Cooling with separated liquid and oil radiators Integrated ignition - injection system MVICS 2.1 (Motor & Vehicle Integrated Control System) with six injectors. Engine control unit Eldor Nemo 2.1, throttle body bore 50 mm diameters full ride by wire Mikuni, pencil-coil with ion- sensing technology, control of detonation and misfire. Torque control with four maps. Traction Control with eight levels of intervention
Electronic quick-shift
MV EAS 3.0 (Electronically Assisted Shift Up & Down)
Clutch
Wet, multi-disc slipper clutch
Transmission
Cassette style; six speed, constant mesh
Primary drive
22/41
First gear
13/37
Second gear
16/34
Third gear
18/32
Fourth gear
19/30
Fifth gear
21/30
Sixth gear
22/29
Final drive ratio
17/43
Maximum speed*
240.0 km/h (149.1 mph)
Acceleration
0-100 km/h in 3.05 s; 0-200 km/h in 9.00 s.
Voltage
12 V
Alternator
350 W at 5.000 rpm
Battery
12 V - 8.6 Ah
Frame type
ALS Steel tubular trellis
Rear swing arm pivot plates material
Aluminium alloy
Front suspension type
Marzocchi “upside-down” telescopic hydraulic fork with TiN low friction treatment; external compression, rebound and spring preload adjustment.
Fork dia.
43 mm (1.69 in.)
Wheel travel
125 mm (4.92 in.)
Rear suspension type
Progressive, Sachs single shock absorber with rebound and compression damping and spring preload adjustment
Single sided swing arm material
Aluminium alloy
Wheel travel
130 mm (5.12 in.)
Front brake
Double floating disc with Ø 320 mm (Ø 12.6 in.) diameter, with steel braking disc and flange
Front brake caliper
Brembo radial-type Stylema, with 4 pistons Ø 30 mm (Ø 1.18 in.).
Rear brake
Single steel disc with Ø 220 mm (Ø 8.66 in.) dia.
Rear brake caliper
Brembo with 2 pistons - Ø 34 mm (Ø 1.34 in.)
ABS System
Continental MK100 with RLM (Rear Wheel Lift-up Mitigation) and with cornering function
Front wheel: Material/size
Aluminium alloy 3.50” x 17”
Rear wheel: Material/size
Aluminium alloy 5.50” x 17”
Front tyre
120/70 - ZR 17 M/C (58 W)
Rear tyre
180/55 - ZR 17 M/C (73 W)
Fairing material
Thermoplastic - Aluminium belly-pan
Wheelbase
1.380 mm (54.33 in.)
Overall length
2.015 mm (79.92 in.)
Overall width
760 mm (28.74 in.)
Saddle height
830 mm (32.68 in.)
Min. ground clearance
120 mm (4.72 in.)
Trail
99 mm (3.89 in.)
Dry weight
173 kg (381.4 lbs.)
Fuel tank capacity
16,5 l (4.36 U.S. gal.)
Environmental Standard
Euro 5
Combined fuel consumption
6.1 l/100 km
CO2 Emissions
139 g/km
SUPERVELOCE S
Timing system
“D.O.H.C” with mechanical chain tensioner and DLC tappet
Total displacement
798 cm3 (48.7 cu. in.)
Compression ratio
13.3:1
Starting
Electric
Bore x stroke
79 mm x 54.3 mm (3.1 in. x 2.1 in.)
Max. power - rpm (at the crankshaft)
108 kW (147 hp) at 13.000 rpm
Max. power - rpm (at the crankshaft) **
112.5 kW (153 hp) a 13.250 rpm**
Max. torque - rpm
88 Nm (8.98 kgm) at 10.100 rpm
Cooling system
Cooling with separated liquid and oil radiators
Engine management system
Integrated ignition - injection system MVICS 2.1 (Motor & Vehicle Integrated Control System) with six injectors. Engine control unit Eldor Nemo 2.1, throttle body bore 50 mm diameters full ride by wire Mikuni, pencil-coil with ion- sensing technology, control of detonation and misfire. Torque control with four maps. Traction Control with eight levels of intervention
Electronic quick-shift
MV EAS 3.0 (Electronically Assisted Shift Up & Down)
Clutch
Wet, multi-disc slipper clutch
Transmission
Cassette style; six speed, constant mesh
Primary drive
22/41
First gear
13/37
Second gear
16/34
Third gear
18/32
Fourth gear
19/30
Fifth gear
21/30
Sixth gear
22/29
Final drive ratio
17/43
Maximum speed*
240.0 km/h (149.1 mph)
Acceleration
0-100 km/h in 3.05; 0-200 km/h in 9.00 s.
Voltage
12 V
Alternator
350 W at 5.000 rpm
Battery
12 V - 8.6 Ah
Frame type
ALS Steel tubular trellis
Rear swing arm pivot plates material
Aluminium alloy
Front suspension type
Marzocchi “upside-down” telescopic hydraulic fork with TiN low friction treatment; external compression, rebound and spring preload adjustment
Fork dia.
43 mm (1.69 in.)
Wheel travel
125 mm (4.92 in.)
Rear suspension type
Progressive, Sachs single shock absorber with rebound and compression damping and spring preload adjustment
Single sided swing arm material
Aluminium alloy
Wheel travel
130 mm (5.12 in.)
Front brake
Double floating disc with Ø 320 mm (Ø 12.6 in.) diameter, with steel braking disc and flange
Front brake caliper
Brembo radial-type Stylema, with 4 pistons Ø 30 mm (Ø 1.18 in.).
Rear brake
Single steel disc with Ø 220 mm (Ø 8.66 in.) dia.
Rear brake caliper
Brembo with 2 pistons - Ø 34 mm (Ø 1.34 in.)
ABS System
Continental MK100 with RLM (Rear Wheel Lift-up Mitigation) and with cornering function
Front wheel: Material/size
Alloy spoke wheel 3.50” x 17”
Rear wheel: Material/size
Alloy spoke wheel 5.50” x 17”
Front tyre
120/70 - ZR 17 M/C (58 W)
Rear tyre
180/55 - ZR 17 M/C (73 W)
Fairing material
Thermoplastic -Aluminium belly-pan
Wheelbase
1.380 mm (54.33 in.)
Overall length
2.015 mm (79.92 in.)
Overall width
760 mm (28.74 in.)
Saddle height
830 mm (32.68 in.)
Min. ground clearance
120 mm (4.72 in.)
Trail
99 mm (3.89 in.)
Dry weight
173 kg (381.4 lbs.) - 165 kg (363,8 lbs.)**
Fuel tank capacity
16,5 l (4.36 U.S. gal.)
Environmental Standard
Euro 5
Combined fuel consumption
6.1 l/100 km
CO2 Emissions
139 g/km
SUPERVELOCE 98
Timing system
“D.O.H.C” with mechanical chain tensioner and DLC tappet
Total displacement
798 cm3 (48.7 cu. in.)
Compression ratio
13.3:1
Starting
Electric
Bore x stroke
79 mm x 54.3 mm (3.1 in. x 2.1 in.)
Max. power - rpm (at the crankshaft)
108 kW (147 hp) at 13.000 rpm
Max. power - rpm (at the crankshaft) **
112.5 kW (153 hp) a 13.250 rpm**
Max. torque - rpm
88 Nm (8.98 kgm) at 10.100 rpm
Cooling system
Cooling with separated liquid and oil radiators
Engine management system
Integrated ignition - injection system MVICS 2.1 (Motor & Vehicle Integrated Control System) with six injectors. Engine control unit Eldor Nemo 2.1, throttle body bore 50 mm diameters full ride by wire Mikuni, pencil-coil with ion- sensing technology, control of detonation and misfire. Torque control with four maps. Traction Control with eight levels of intervention
Electronic quick-shift
MV EAS 3.0 (Electronically Assisted Shift Up & Down)
Clutch
Wet, multi-disc slipper clutch
Transmission
Cassette style; six speed, constant mesh
Primary drive
22/41
First gear: Speed
13/37
Second gear: Speed
16/34
Third gear: Speed
18/32
Fourth gear: Speed
19/30
Fifth gear: Speed
21/30
Sixth gear: Speed
22/29
Final drive ratio
17/43
Maximum speed*
240.0 km/h (149.1 mph)
Acceleration
0-100 km/h in 3.05; 0-200 km/h in 9.00 s.
Voltage
12 V
Alternator
350 W at 5.000 rpm
Battery
12 V - 8.6 Ah
Frame type
ALS Steel tubular trellis
Rear swing arm pivot plates material
Aluminium alloy
Front suspension type
Marzocchi “upside-down” telescopic hydraulic fork with TiN low friction treatment; external compression, rebound and spring preload adjustment
Fork dia.
43 mm (1.69 in.)
Fork travel
125 mm (4.92 in.)
Rear suspension type
Progressive, Sachs single shock absorber with rebound and compression damping and spring preload adjustment
Single sided swing arm material
Aluminium alloy
Wheel travel
130 mm (5.12 in.)
Front brake
Double floating disc with Ø 320 mm (Ø 12.6 in.) diameter, with steel braking disc and flange
Front brake caliper
Brembo radial-type Stylema, with 4 pistons Ø 30 mm (Ø 1.18 in.).
Rear brake
Single steel disc with Ø 220 mm (Ø 8.66 in.) dia.
Rear brake caliper
Brembo with 2 pistons - Ø 34 mm (Ø 1.34 in.)
ABS System
Continental MK100 with RLM (Rear Wheel Lift-up Mitigation) and with cornering function
Front wheel: Material/size
Alloy spoke wheel 3.50” x 17”
Rear wheel: Material/size
Alloy spoke wheel 5.50” x 17”
Front tyre
120/70 - ZR 17 M/C (58 W)
Rear tyre
180/55 - ZR 17 M/C (73 W)
Fairing material
Thermoplastic -Aluminium belly-pan
Wheelbase
1.380 mm (54.33 in.)
Overall length
2.015 mm (79.92 in.)
Overall width
760 mm (28.74 in.)
Saddle height
830 mm (32.68 in.)
Min. ground clearance
120 mm (4.72 in.)
Trail
99 mm (3.89 in.)
Dry weight
173 kg (381.4 lbs.) - 165 kg (363,8 lbs.)**
Fuel tank capacity
16,5 l (4.36 U.S. gal.)
Environmental Standard
Euro 5
Combined fuel consumption
6.1 l/100 km
CO2 Emissions
139 g/km
SUPERVELOCE
LXP ORIOLI
Timing system
“D.O.H.C” with mechanical chain tensioner and DLC tappet
Total displacement
931cm3 (96.8 cu. in.)
Compression ratio
13.4:1
Starting
Electric
Bore x stroke
81 mm x 60.2 mm (3.19 in. x 2.37 in.)
Max. power - rpm (at the crankshaft)
91 kW (124 hp) at 10.000 rpm
Max. torque - rpm
102 Nm (10.4 kgm) at 7.000 rpm
Cooling system
Cooling with separated liquid and oil radiators
Engine management system
Integrated ignition - injection system MVICS 2.1 (Motor & Vehicle Integrated Control System) with three injectors. Engine control unit Eldor Nemo 2.2, throttle body bore 47 mm diameters full ride by wire Mikuni, pencil-coil with ion-sensing technology, control of detonation and misfire. Torque control with four maps. Traction Control with eight levels of intervention with lean angle sensor and inertial measurement unit (IMU)
Electronic quick-shift
MV EAS 4.0 (Electronically Assisted Shift Up & Down)
Clutch
Wet multidisc hydraulic clutch
Transmission
Cassette style; six speed, constant mesh
Primary drive
21/39
First gear: Speed
13/40
Second gear: Speed
16/35
Third gear: Speed
18/30
Fourth gear: Speed
21/29
Fifth gear: Speed
23/28
Sixth gear: Speed
27/29
Final drive ratio
17/41
Maximum speed*
230 km/h (143 mph)
Acceleration
0-100 km/h in 3.72 s
Voltage
12 V
Alternator
450 W at 5.000 rpm
Battery
12 V - 12.6 Ah
Frame type
Main frame: double beam frame structure, composed by high-tensile steel pipes and forged components. Bolt on double cradle. Rear frame: trellis structure, composed by high-tensile steel pipes
Front suspension type
Type Sachs “UPSIDE DOWN” telescopic hydraulic fork with rebound – compression damping and spring preload external and separate adjustment.
Fork dia.
48 mm (1.89 in.)
Fork travel
210 mm (8.27 in.)
Rear suspension type
Progressive link, Sachs monoshock with rebound, compression and spring preload adjustable hydraulics.
Single sided swing arm material
Aluminium die cast twin sided swing arm
Wheel travel
210 mm (8.27 in.)
Front brake
Double floating disc with Ø 320 mm (Ø 12.6 in.) diameter, with steel braking disc and flange
Front brake caliper
Brembo Stylema caliper, with 4 pistons Ø 30 mm (Ø 1.18 in.)
Rear brake
Single steel disc with Ø 265 mm (Ø 10.43 in.) dia
Rear brake caliper
Brembo caliper with 2 pistons - Ø 265 mm (Ø 10.4 in.)
ABS System
Continental MK100 with RLM (Rear Wheel Lift-up Mitigation) and cornering function.
Front wheel: Material/size
Spoked, tubeless, with aluminium hub and rim Takasago Excel 2,15” x 21”
Rear wheel: Material/size
Spoked, tubeless, with aluminium hub and rim Takasago Excel 4” x 18”
Front tyre
90/90 - 21 M/C (54 Q)
Rear tyre
150/70 - B 18 M/C (70 Q)
Fairing material
Thermoplastic
Wheelbase
1.610 mm (63.39 in.)
Overall length
2.360 mm (92.91 in.)
Overall width
980 mm (35.58 in.)
Saddle height
850/870 mm (33.46/34.25 in.)
Min. ground clearance
230 mm (9.05 in.)
Trail
118 mm (4.64 in.)
Dry weight
224 kg (493.84 lbs.) - 220 kg (485.0 lbs.)**
Fuel tank capacity
20l (5.28 U.S. gal.)
Environmental Standard
Euro 5
Combined fuel consumption
5,6 l/100 km
CO2 Emissions
130 g/km
LXP
bottom of page